Bobcat Fluids, Lubricants & Oils
Bobcat lubricants are designed to provide optimal protection that adapts to the working conditions, resulting in improved soot handling, wear protection, and resistance to breakdown under high temperatures.
Why new generation engine oils?
Regulations on emissions reduction, influence of engine design and qualitative levels of lubricants. Bobcat Ultra Engine Power SAE 10W/30 and 15W/40 use the latest additive technology to protect under the most severe engine conditions found in modern low-emission engines. The oils are designed to provide optimal protection that adapts to the working conditions – resulting in improved soot handling, wear protection and resistance to breakdown under high temperatures. The low-ash formulation helps protect the exhaust catalyst and particle filters as used on the latest low‑emission vehicles – making. It makes the oil suitable for the most modern low‑emission heavy-duty engines.
Bobcat Branded Lubricants
- Better dispersion to work with higher levels of soot
- Better detergency to minimise deposit formation
- Suitable with Ultra Low Sulphur Fuel (ULSF – 10 ppm) and 50 ppm sulphur content fuels
- Designed to fully meet the requirement of engines fitted with EGR (Exhaust Gas Recirculation) Valve to reduce emissions of NOx (Nitrogen Oxides)
- Superior protection against corrosion caused by acidic by-products of the combustion process
- Better compatibility with new seals used in new generation engines
- Improved protection with the higher operating temperature typical of the new low emission engines
CI–4 ENGINE OILS FOR TIER III / STAGE IIIA ENGINES
The engine power oils are intended for the Bobcat equipment requiring API CI–4 or ACEA E7 engine oils and not in need of lower SAPS engine oils (API CJ–4 / CK–4 and or ACEA E9). May also be used in other earthmoving machines. Please refer to the owner’s manual of the product.
Bobcat Engine Power
SAE 10W/30
MAIN CHARACTERISTICS
- Synthetic based
- Provides superior lubrication at low temperature start‑ups (–25°C)
- All-season protection
- Best protection for new and older engines, not equipped with emission reduction systems.
- Low evaporability, less top-ups required
- Also suitable for petrol engines
- Excellent dispersion, minimizing the formation of sludge and deposits
CLIMATE: NORTH CONTINENTAL
For engines with emission reduction systems, such as DPF: No
INTERNATIONAL STANDARDS
- API CI–4
- ACEA E7
| 5L CAN (BOX of 4) | 20L CONTAINER | 210L DRUM | 1000L TANK | |
| P/N | 6987789A | 6987789B | 6987789C | 6987789D |
Bobcat Engine Power
SAE 15W/40
MAIN CHARACTERISTICS
- Low evaporability, less top-ups required
- All-season protection
- Best protection for new and older engines, not equipped with emission reduction systems
- Also suitable for petrol engines
- Excellent dispersion, minimizing the formation of sludge and deposits
CLIMATE: NORTH CONTINENTAL
For engines with emission reduction systems, such as DPF: No
INTERNATIONAL STANDARDS
- API CI–4
- ACEA E7
| 5L CAN (BOX of 4 | 20L CONTAINER | 210L DRUM | 1000L TANK | |
| P/N | 6987790A | 6987790B | 6987790C | 6987790D |
CJ–4 ENGINE OILS FOR TIER IV / STAGE IV ENGINES
The engine power oils are intended for the Bobcat equipment not in need of lower SAPS engine oils meeting API CJ–4 and or ACEA E9. May also be used in other earthmoving machines. Please refer to the owner’s manual of the product.
Bobcat Ultra Engine Power SAE 10W/30
MAIN CHARACTERISTICS
- Lower SAPS oil
- Synthetic based
- Provides superior lubrication at low temperature start‑ups (–25°C)
- All-season protection
- Best protection for new and older engines with emission reduction systems.
- Low evaporability, less top-ups required
- Also suitable for petrol engines
- Excellent dispersion, minimizing the formation of sludge and deposits
- Certified enhanced lifetime of the emission control system
CLIMATE: NORTH CONTINENTAL
For engines with emission reduction systems, such as DPF: Yes
INTERNATIONAL STANDARDS
- API CJ–4
- ACEA E9/E7
| 5L CAN (BOX of 4) | 20L CONTAINER | 210L DRUM | 1000L TANK | |
| P/N | 6987818A | 6987818B | 6987818C | 6987818D |
Bobcat Ultra Engine Power SAE 15W/40
MAIN CHARACTERISTICS
- Lower SAPS oil
- All-season protection
- Best protection for new and older engines with emission reduction systems
- Low evaporability, less top-ups required
- Also suitable for petrol engines
- Excellent dispersion, minimizing the formation of sludge and deposits
- Certified enhanced lifetime of the emission control systems
CLIMATE: NORTH CONTINENTAL
For engines with emission reduction systems, such as DPF: Yes
INTERNATIONAL STANDARDS
- API CJ–4
- ACEA E9/E7
| 5L CAN (BOX OF 4) | 20L CONTAINER | 210L DRUM | 1000L TANK | |
| P/N | 6987819A | 6987819B | 6987819C | 6987819D |
CJ–4 ENGINE OILS FOR TIER IV / STAGE IV ENGINES
Latest generation of Bobcat High Performance Low SAPS engine oils meeting API CK–4 or ACEA E9/E7 standards and suitable for Euro V and Euro VI heavy-duty diesel applications, including: modern, high-output, low-emission engines fitted with emission control systems using DPF, SCR, DOC and EGR technologies. It is also suitable for older turbocharged and naturally aspirated diesel engine generations, both on‑highway and off-highway, running on low or ultra-low Sulfur diesel and bio-diesel. May also be used in other earthmoving machines and previous generations of Bobcat machines.
Ultra Engine Power
SAE 10W/30
CLIMATE: NORTH CONTINENTAL
For engines with emission reduction systems, such as DPF: Yes
INTERNATIONAL STANDARDS
- API CK–4
- ACEA E9/E7
| 5L CAN (BOX oF 4) | 20L CONTAINER | 210L DRUM | 1000L TANK | |
| P/N | 7341377A | 7341377B | 7341377C | 7341377D |
Ultra Engine Power
15W/40
CLIMATE: SOUTH CONTINENTAL
For engines with emission reduction systems, such as DPF: Yes
INTERNATIONAL STANDARDS
- API CK–4
- ACEA E9/E7
| 5L CAN (BOXof 4) | 20L CONTAINER | 210L DRUM | 1000L TANK | |
| P/N | 7395725A | 7395725B | 7395725C | 7395725D |
Hydraulic / Hydrostatic Oils
Special all-season high performance lubricants for hydraulic/hydrostatic systems designed and recommended for all Bobcat equipment. This unique, custom blended fluid with the finest base oils and additives meeting Bobcat Engineering’s stringent specifications for quality and reliability.
Bobcat Superior SH
Hydraulic/Hydrostatic
Bobcat Hydraulic/Hydrostatic fluid is a special blend of high quality lubricants designed to provide optimum flow at subzero temperatures yet maintain excellent stability during periods of high temperature use. Bobcat’s Hydraulic/Hydrostatic fluid formula cannot be duplicated from off-the-shelf hydraulic fluids.
| 5L CAN (BOX OF 4) | 20L CONTAINER | 210L DRUM | 1000L TANK | |
| P/N | 6987791A | 6987791B | 6987791C | 6987791D |
MAIN CHARACTERISTICS
- The same premium fluid as factory fill
- High filterability: very significant reduction of filter plugging phenomena
- 100% shear stable – Maintains superior performance under operating conditions unlike standard hydraulic lubricants
- Excellent thermal stability: high performance at high temperatures
- Excellent pumpability / start-ups at low temperatures
MAIN CHARACTERISTICS
- Very high anti-wear properties
- Low evaporability, less top-ups
- Ensures seal performance and protects critical bearings, cylinder and gears
- Removes heat and wear debris and keeps the system clean
- Special anti-foaming agent to assure proper functioning of the systems
- Very low deposit formation
PERFORMANCE LEVEL
- DIN 51524 Part 3 HLP
- FZG 10 pass
Bobcat Bio Hydraulic
SBH Synthetic
Bobcat Biodegradable Hydraulic Oil is a premium, high performance environmentally friendly hydraulic oil designed to provide outstanding systems performance.
| 5L CAN (BOX OF 4) | 20L CONTAINER | 210L DRUM | |
| P/N | 6987792A | 6987792B | 6987792C |
MAIN CHARACTERISTICS
- Biodegradable and environmentally friendly – 100% synthetic biodegradable hydraulic lubricant on HEES synthetic esters (not of vegetable origin)
- Can be mixed with Bobcat Superior SH and conventional hydraulic oils (if blended, performance and biodegradability will be compromised)
- Excellent thermal stability: high performance at high temperatures
- Very low deposit formation
- Excellent pumpability / start-ups at low temperatures
- Very high anti-wear properties
- Low evaporability, less top-ups
- Removes heat and wear debris and keeps the system clean
PERFORMANCE LEVEL
- AFNOR NFE 48–690 (dry filterability)
- AFNOR NFE 48–691 (wet filterability)
- DIN 51524 Part 4 HVLP
- Vickers I–286–S / M–2950–S
- Cincinnati Milacron P–68 / P–69 / P–70
- Lee Norse 100–1
- Jeffrey No. 87
- Ford M–6C32
- S. Steel 127 / 136
- F. Goodrich 0152
- General Motors LH–04–1 / LH–06–1 / LH–15–1
- Racine models
Bobcat Bio Hydraulic 32
High performance vegetable based Biodegradable Hydraulic lubricant designed and recommended for Bobcat Roto Telescopic Handlers.
| 5L CAN (Box of 4) | 20L CONTAINER | 210L DRUM | 1000L TANK | ||
| P/N | 6987877A | 6987877B | 6987877C | 6987877D | |
MAIN CHARACTERISTICS
- Biodegradable and Environmentally friendly – 100% biodegradable hydraulic lubricant based on vegetable oils
- Excellent pumpability / start-ups at low temperatures
- Low deposit formation
- Very high anti-wear properties
- Ensures seal performance and protects critical bearings, cylinder and gears
PERFORMANCE LEVEL
- DIN 51524 part 3 HVLP
COMPATIBILITY WITH SEALS
| RECOMMENDED | NOT RECOMMENDED |
| Fluorocarbon polymers | Butyl rubber |
| Fluorosilicone rubber | Ethylene propylene copolymers |
| Nitrile rubber (>30% acrylonitrile) | Nitrile rubber (<30% acrylonitrile) |
| Polyacrylate rubber | Ethylene propylene terpolymers |
| Polyurethane rubber | Polychloroprene |
| Silicone rubber | Natural rubber |
AXLE / TRANSMISSION OIL
When you depend on performance and reliability, count on bobcat lubricants and fluids to deliver superior results in all job conditions.
- Bobcat Transmission and Differential Oil is an extra high‑performance multipurpose lubricant engineered to meet or exceed transmission and certain hydraulic Oil requirements. The advanced technology is designed to optimize the performance of equipment operating in a wide range of environments and conditions.
- Bobcat Transmission and Differential Oil combines select base oils and an advanced additive package to deliver the varied lubricant performance properties required in severe duty applications.
Bobcat Transmission and Differential Oil delivers exceptional performance in today’s power train transmissions and drive axles
Bobcat Axle
Transmission Oil
Special axle/transmission fluid designed and recommended for all Bobcat machines.
MAIN CHARACTERISTICS
- Special friction modifiers combined with a balanced and precise blend of other components
- Suitable for a wide range of friction disc materials (graphite, paper, sintered materials, etc)
- Longer maintenance intervals
- High thermal resistance
- Recommended for axles with wet brakes, limited slip differentials and gearboxes
- UTTO = Universal Tractor Transmission Oil
INTERNATIONAL STANDARDS
- API GL–4 Low speed/High torque
OEM STANDARDS
- ZF TE-ML 03E, 05F, 17E, 21F
- Allison C–4
- Caterpillar TO–2
- Ford New Holland ESEN M2C86C
- Ford New Holland M2C86A/B, M2C41B, M2C48B, M2C53A, M2C134A/B/C
- Massey Ferguson M1135, M1110, M1127, M1129A, M1141
- John Deere J20C
- Case International MS1210, MS1204, MS1205, MS1206, MS1207
- DENISON HF–0/HF–1/HF–2
Bobcat Axle GL–5 LS
SAE 85W/90
High performance Limited Slip Axle lubricant designed and recommended for all Bobcat machines.
MAIN CHARACTERISTICS
- Superior protection of gears, crown wheels and pinions
- The use of a particular and specific friction modifier (Limited Slip additive) allows usage wherever an effective and lasting reduction in jerking and vibration (Stick-Slip) is required
- Recommended for heavy-duty limited slip differentials with wet brakes/clutches
INTERNATIONAL STANDARDS
- API GL–5
OEM STANDARDS
- ML-L–2105D
Brake Fluid
Special brake fluid designed and recommended for Bobcat brake systems on Telescopic Handlers produced up to December 2003. Suitable also for other applications when an LHM oil is recommended. Do not mix with DOT fluids.
Bobcat Brake Fluid LHM
MAIN CHARACTERISTICS
- Suitable for all climates
- LHM = Liquid Hydraulic Minerale
PERFORMANCE LEVEL
- NF ISO 7308
- ISO 7308
- PSA B–712710
Coolant & Antifreeze
Special new generation long life silicate free PG coolant/antifreeze designed and recommended for all Bobcat equipment. Suitable also for other earthmoving machines, commercial vehicles, vans and cars. Provides freeze protection down to –36°C.
Bobcat PG Coolant 4 Seasons
Long life silicate free PG coolant/antifreeze designed and recommended for all Bobcat equipment. Suitable also for other earthmoving machines, commercial vehicles, vans and cars. Provides freeze protection down to –36°C.
MAIN CHARACTERISTICS
- Long life (up to 5 years).
- Silicate free coolant – highly reduced deposit formation.
- Excellent anti-corrosion protection for aluminium and different alloys/materials.
- Recommended for mixed fleet cooling systems.
- 4 seasons coolant/antifreeze.
- Formulated with demineralized water.
- PG formula is substantially less toxic then EG (ethylene glycol) based antifreeze.
USAGE
- Important: do not add water.
- Before using Bobcat PG Coolant to replace EG Coolant, thoroughly flush the system.
- Do not use an ethylene glycol hydrometer to test propylene glycol base coolants.
Base: Propylene glycol (PG) mixture
Type: Premix – ready to use
Freezing point: –36°C
Bobcat EG Coolant – Concentrated
High performance concentrated Ethylene Glycol coolant designed and recommended for Bobcat equipment
MAIN CHARACTERISTICS
- High durability / protection (up to 4000 h / 5 years).
- Free of silicate, borate, amine, nitrate and phosphate Specific for aluminium radiators cooling systems in particular.
Base: Ethylene glycol (EG) based antifreeze/coolant
Type: Concentrate – to be diluted with water.
USAGE
- Use of deionised water recommended (soft water possible). Do not mix with waste, industrial or sea water.
- 50/50 mixture of coolant and water provides –36°C protection.
- Before adding Bobcat EG Coolant to replace PG Coolant, thoroughly flush the system.
Freezing point: –36°C (50/50 mixture)
Bobcat EG Coolant –36°C
High performance pre-mixed Ethylene Glycol coolant designed and recommended for Bobcat equipment.
MAIN CHARACTERISTICS
- Free of silicate, borate, amine, nitrate and phosphate.
- High durability / protection (up to 4000 h / 5 years).
- Specific for aluminium radiators cooling systems in particular.
- Ready to use, pre-mixed with demineralized water.
USAGE
- Important: do not add water.
- Before adding Bobcat EG Coolant to replace PG Coolant, thoroughly flush the system.
Base: Ethylene glycol (EG) based antifreeze/coolant
Type: Premix – ready to use
Freezing point: –36°C
Bobcat Grease
Bobcat Multi-Purpose
MAIN CHARACTERISTICS
- High performance lithium grease for wet conditions and moderate loads.
- Excellent rust and corrosion protection for prolonged equipment life.
- Formulated with high quality base oils and anti-wear additives.
- High temperature performance with long grease life and reduced maintenance potential.
APPLICATION
- Routine and moderately loaded applications.
- Ideal for high performance, high speed bearings and joints.
- Regular re-greasing required.
SEAL COMPATIBILITY
Good seal compatibility. Protects against degradation and swelling of seal materials.
DROP POINT 260°C
COLOUR Green
Bobcat Supreme HD
MAIN CHARACTERISTICS
- Extra high-performance lithium grease with extreme pressure additives especially suitable for axles, rings and bearings.
- Superb adhesion, structural stability and water wash out resistance for reduced leakage and extended re‑lubrication for reduced usage.
- Very good anti-wear and extreme pressure performance.
- Excellent protection in wet conditions and under heavy loads.
- Ideal for lube points with sliding and pivoting movements
APPLICATION
- High temperature, severe and heavy loaded applications.
- Less washout and excellent anti-wear for extreme pressure performance.
- Regular re-greasing recommended.
SEAL COMPATIBILITY
Contains polymer to add tackiness to resist “fling off” from grease collar at seal/ bushing.
DROP POINT From 280°C
COLOUR Blue
Bobcat Extreme HP
MAIN CHARACTERISTICS
- Extra high-performance extreme pressure grease with 3% molybdenum disulphide for increased anti-wear and low speed protection.
- Excellent adherence to all surfaces and water wash out resistance.
- Provides exceptional protection against wear and heavy shock loads, also in wet conditions.
APPLICATION
- Designed for routine and heavy load applications.
- Long lasting, stay-put grease with excellent water and pressure resistance.
- Ideal for exposed joints and pivots.
- Prolonged re-greasing intervals possible if appropriate.
SEAL COMPATIBILITY
Contains polymer and moly to add tackiness to stay put.
DROP POINT From 260°C
COLOUR Grey